Keeping Your Electric Battery Clean Helps Make Your Car Or Truck Safe
Ever attempted to jump start your car battery and was shocked that it was covered in gunk? That gunk that goes all over the battery happens to be corrosion formed by acid condensation. You can easily clean this by using a simple chemical solution. Something as simple as baking soda may easily clean the battery acid. You'll want to be mindful when doing it but there are just a couple of instructions on how to clean your battery.
First off, you'll want the tools which you can locate easily in your home. The essential tools you'll need are a pair of safety glasses to cover your eyes, adjustable pliers and a screwdriver with insulated handles, a stiff bristled brush, and the key component, baking soda. Other things you need consists of a metal or plastic scraper, box or open-end wrenches, cleaning brushes for the battery terminal, and either a turkey baster or small funnel. You must also have a number of sponges, spray-type household cleaner, rubber gloves and a bucket of clean water. All of this will guarantee a safe cleaning of your battery.
You'll require the safety glasses and rubber gloves to protect yourself from the sulfuric acid that's contained in the corrosive deposits. You also want to make certain that the deposits avoid getting on the car since it will damage the paint. According to the level of dirt and decay on the battery, the cleaning can vary, and some of the steps might not be necessary. It is possible, to get all of the grime and corrosion off of the battery, that the battery will need to be taken out of the vehicle. The first task is to use the scraper to eliminate as much dirt as possible and use the bristle brush to get at more.
Next step will be to put together one tablespoon of baking soda with a pint of water and add the solution to the battery and the cable connection using the funnel or turkey baster. Work the solution of baking soda into the heavily corroded places with the brush, and disconnect the battery cables from the terminals for easier cleaning. You'll be able to remove the cables, starting with negative first then positive, using the pliers and wrenches. Brush aside much of the check out this site oxidation from the terminals and all of the parts, and then flush each one with the baking soda solution.
At this point use the liquid cleaner within the spray bottle, and a sponge to get rid of the remaining dirt and grease. Dry everything off using a fresh cloth and then reassemble everything the way you took it apart, reconnecting the positive first. Make sure everything is secure and you then have a clean, safe battery.